| || |
Who can use the service?
The “Code Hosting with TIM Hosting” offer is aimed at sector operators that:
Description of the service
The Code Hosting with TIM Hosting service allows Operators that do not have their own telephone network to provide voice services to their end users through the use of a dedicated service platform provided by TIM, which allows the virtualisation of the voice network of the Operator itself.
To implement the Code Hosting with TIM Hosting service, TIM has set up a special platform on which it reserves transmission, memory and processing resources for the Operator without an infrastructure who signs up for the service, thus virtualising the existence of its voice network: the Platform emulates the presence of a switching node of the Operator interconnected with the telephony network of TIM.
With this solution, the Operator has the ability to provide voice services to its end users configured in Carrier Selection "Easy Access" (CS), Carrier Preselection (CPS) and Wholesale Line Rental (WLR).
The CS, CPS and WLR services make it possible to collect calls originating from the end users connected to the TIM telephone network through the use of the OP_ID provided by the Operator and specific routing numbers.
In the case of operators with an infrastructure interconnected with TIM, the calls collected are routed to the Operators' switching network via the interconnection set up between TIM and the Operator; in the case of the Code Hosting with TIM Hosting service, the calls collected are instead routed to the aforementioned hosting Platform. Specifically, for each hosted Operator, the provisioning of a logical channel for direct interconnection is carried out in a similar way to those for IP interconnection, with the difference that the Operator is substituted and virtualised by the resources reserved for it on the Platform.
Once calls have been collected as provided for by the CS, CPS and WLR services, for each call the Platform checks that the calling party is included among those that the Operator has enabled for the service, and performs the switching on behalf of the Operator. Following this stage, through the direct interconnection logic channel, calls are routed back to the TIM voice network, which sees to their possible transit and termination.
It should be noted that, for purpose of providing the Code Hosting with TIM Hosting service, the reverse type logical channels do not need to be configured between the Platform and the TIM voice network, there need only be one direct interconnection channel.
The Wholesale Portal allows the Operator to independently and "safely" access the Platform for the remote management of the services it is subscribed to.
The functions enabled include:
The “Code Hosting with TIM Hosting” service offer includes the following elements of interest:
For more technical-sales information on this service, please contact your Account Manager.
If you are not a Customer yet, click here and enter your data. One of our Commercial Representatives will contact you as soon as possible! No-obligation enquiry.
The services described above are intended exclusively for: