- What do we mean by Terminating Circuit?
- Which TIM Delivery Points are enabled to gather Terminating circuits?
- Is there a Database (DB) of the exchanges enabled to collect the Ethernet Terminating circuits on optic fibre?
- What are feasibility studies for?
- When is a feasibility study mandatory?
- What are the response times for a Feasibility Study?
- Are charges made for the feasibility study?
- What are termination costs?
- How can the length of the connection as the crow flies be calculated to determine the price of “traditional” Terminating Circuits?
- How can the price of the Ethernet Terminating Circuits be determined?
- Pursuant to Market 4 (formerly 6), is certification by the Operator necessary for the open PoPs?
- What contracts are necessary in order to be able to use the Terminating service?
- What is required to access the Ethernet Terminating Service on optic fibre?
- Which Classes of Service (CoS) are guaranteed for Ethernet Terminating Circuits on optic fibre?
- It is possible to extend an Ethernet Terminating circuit on optic fibre on a DP other than that belonging to the connection exchange of the end user's premises?
By Terminating circuit we mean a circuit with a dedicated capacity between a network termination point coinciding with the premises of an end user and a termination point at one of the TIM nodes (DP) enabled to gather Terminating circuits.
Two different types of Terminating circuits are available (with different technical characteristics and delivery solutions):
- Analogue Terminating Circuits, PDH, SDH, Ethernet over SDH: “traditional” Terminating circuits created in analogue technology or via PDH or SDH transport;
- Ethernet Terminating Circuits on optic fibre: “new generation” circuits, created through Ethernet transport on optic fibre.
For the “traditional” Terminating circuits there are 561 Regional Transmission Nodes (RTN) to which the Operator can connect to collect Terminating Circuits within the context of the entire RTA (Regional Transmission Area) to which the node belongs; the list of Transmission Nodes is set out in ANNEX 1 of the Reference Offer. For the “new generation” Terminating circuits they are the Delivery Points of the Ethernet network enabled to collect this type of circuit; the list of Ethernet Delivery Points is available in the “Coverage” section.
Yes, the “Coverage” section contains a list of the exchanges collected by each DP and the relative range.
The feasibility study is used to verify the availability of the installation resources necessary to realize the service requested and to define its delivery times and costs.
The feasibility study is mandatory in the following cases:
- “traditional” Terminating circuits with a speed of over 2 Mbit/s or significant quantities of 2 Mbit/s circuits at the same premises and/or same line;
- Ethernet Terminating circuits on optic fibre relating to end user premises belonging to exchange bands between 0 and 3 with “non standard” configurations;
- Ethernet Terminating circuits on optic fibre relating to end user premises belonging to different exchange bands from 0, 1, 2 and 3.
On average TIM responds within 10 calendar days.
Yes, if the Operator fails to place the order, the cost is 260 euros; this cost is not due if the circuit is subsequently ordered by the Operator.
No termination costs are anticipated if terminations occur after the expiry of the minimum contract term (one year after activation).
By using the special tools available on the Portal.
For the configurations described in the Reference Offer, the price depends on the speed range the circuit belongs to and the “Band” (0, 1, 2 and 3) of the connection exchange of the Circuit.For Circuits belonging to bands other than 0, 1, 2 and 3 and for non-standard configurations of circuits in bands 0, 1, 2 and 3, the prices are determined each time based on the outcome of the feasibility study (always mandatory).
Yes it is.
The signing of a specific contract for each of the two different types of Terminating circuits (Analogue Terminating circuits, PDH, SDH, Ethernet over SDH and Ethernet Terminating circuits on optic fibre) is required. Furthermore, if the Operator is not co-located in the transmission node(s) (NTR) in which they intend to gather the PDH, SDH, Ethernet over SDH Terminating Circuits, they must sign the new contract for Interconnect Flows at the same time.
The requesting Operator must purchase a “Kit” in advance in the Distribution Point to collect this type of service.
Three Classes of Service are envisaged: CoS 2, 3 and 5.
No, the circuit must be collected on a Kit connected to the Distribution Point with territorial authority for the connection exchange of the network termination point; there is therefore no option to extend the circuit on another Distribution Point.
click here for further infomation